Packaged Pumping Stations

Packaged Pumping Stations

Small packaged pumping stations

Single Box and Double Box

  • SINGLEBOX version 270 litre tank (Single pump).
  • DOUBLEBOX version 550 litre tank (Dual pump).
  • Tank made from 100% recyclable polyethylene, highly resistant to chemical attack and UV rays.
  • Airtight anti-pollution tank, to according to standard EN 12050.

Product features

Wastewater pumping stations for indoor and outdoor installation

Designed according to EN 12050

Flows up to 85 m3/h

Heads up to 25 m

Volume up to 550 l

The ideal solution when domestic clean water, rain water, gray water and wastewater must be delivered to sewer mains located at a higher level, or where gravity drainage is not possible.

Easy to install

  • Choice of positions allows best-fit location for inlet connection.
  • SINGLEBOX and DOUBLE can be installed on the ground or buried in a suitable structure.
  • Installation is quick and easy: for the single-phase versions you just connect the pipes and the electrical cables; for the three-phase versions you also need to connect the control panel.
  • The SINGLEBOX and DOUBLE are provided with side handles for ease of handling.
  • Pre-installed delivery pump and unions

Medium packaged pumping stations

Prefabricated lifting station for domestic wastewater and sewage from individual households. Suitable for installation below ground.

  • MIDIBOX SERIES, two sizes available: height 1300mm, diameter 1100mm, 1200 litre tank. height 2000mm, diameter 1100mm, 1900 litre tank.
  • Wide range of available pumps. – Polyethylene tank, highly resistant to chemical attack (acids, alkaline compounds oils, dairy products, hydrocarbons).
  • Tank designed to withstand soil stress.

Product features

  • Quality pumps used with UK manufacturer support
  • Single and twin pump options
  • Various impeller options – vortex, channel, open
  • Grinder Pump options available
  • Flows up to 960 l/min, heads up to 14 metres
  • Can pump up to 65mm diameter solid in suspension
  • Float switches c/w 10M cable
  • Can be supplied with control panel

The ideal solution when domestic clean water, rain water, gray water and wastewater must be delivered to sewer mains located at a higher level, or where gravity drainage is not possible.

Easy to install

  • Drillable inlet surface makes for versatile connection options
  • Drillable planes allow space for cables or air vents. Connection to inlet piping via a flexible joint for quick fitting
  • ‘All-In-One’ kit includes check valve and comes complete with all internal connecting pipes ready-fitted.
  • Tank design incorporates a reinforced base with anchoring holes to enhance rigidity and anchoring into the concrete base.
  • Lifting tabs make secure installation easier.
  • Feet on tank help stabilise the station during the installation process.

Easy to use

  • Cover can be screwed and unscrewed manually
  • Automatic failsafe backup dual-pump system.
  • Dual-pump system with control panel offering automatic pump mode setting.
  • Can run fully automatically with low maintenance.

Dependability and servicing

  • Tried and tested pump technology.
  • Fitted mounting base and steering bar specially designed to facilitate pump removal.

Large packaged pumping stations

Product features

The following Package Pumping stations are supplied with a robust GRP tank, suitable for below ground installation and comply with the relevant building regulations.

The package pump stations are designed to collect foul water from an entire property or other buildings which houses multiple people such as commercial offices and other light commercial applications. With a full range of standard sizes and our ability to manufacture bespoke stations, our packaged pumping stations are suitable for a wide range of applications and budget.

Ideally suited for builders or contractors looking for a cost effective solution for the removal of waste water.

  • Manufactured in GRP
  • Available in standard sizes ranging from 1 to 2.5 metres in diameter
  • Available in the range of depths
  • Flexible, bespoke packaged pumping stations can be designed and manufactured to suit your application

Product features

  • Quality pumps used with UK manufacturer support
  • Single and twin pump options
  • Various impeller options – vortex, channel, open
  • Grinder Pump options available
  • Flows and head sized to application
  • Can pump up to 100mm diameter solid in suspension
  • Float switches c/w 10M cable
  • Supplied with control panel

All of our packaged pumping stations come complete with internal pipework, valves, pumps, monitoring and control equipment, floats and pump stools. The range is available with either internal or external valve chambers

Talk to the pump experts Unsure on anything or need some further advice? Call us:
01977 661 711
Email us:
sales@fluidpumps.co.uk

    Talking to the pump experts

    We take great pride in everything we do, complete control over our products allows us to ensure our customers receive the best service

    More than just Pump Sales With over 60+ years experience in pump sales, repair, installation and Commisioning
    A wide range of Spares To support our customers, we carry an extensive amount of spares and service kits in our warehouse which allows same day or next day service anywhere in the UK.
    Experienced Pump Repair From our workshop facilities we provide the complete in-house pump repair solution for a wide variety of industrial and commercial pumps. With our qualified and experienced engineers this allows us to guarantee high levels of quality and service.
    Pump Installation Fluid Pumps are at the forefront of general pump repairs, maintenance, remedial work and pump installation. You can count on us to control your project from pump selection, design to installation.
    Pump Commisioning We provide a comprehensive commissioning service for pumping equipment we have installed or done by others. We have a pre-commissioning check list that makes sure no unnecessary site visits are made.

    © 2025 Fluid Pumps Ltd | Company no: 4799134 | VAT no: 817321839

    Cookie Policy|Privacy Policy|Terms & Conditions website createdfor Fluid Pumps